Schedule B
LOCAL 138 INTERNATIONAL UNION OF OPERATING ENGINEERS
SCHEDULE B Building Construction
WAGE SCHEDULE EFFECTIVE DATE
JUNE 1, 2021 to MAY 31, 2022
UNION OFFICE (631) 694-2480 EXT. 1
WELFARE FUND (631) 694-2140 EXT. 2
STAMP FUND (631) 694-2478 EXT. 3
GREASE TIME RATE SINGULARLY OPERATED MACHINES
Period June 1, 2021 thru May 31, 2022
BUILDING CONSTRUCTION DIVISION
LOCAL 138 OPERATING ENGINEERS
WAGE | |
AA – Crane Rate | 52.34 |
A – Rate | 43.71 |
B – Rate | 41.54 |
C – Rate | 40.08 |
D – Rate | 37.15 |
E – Rate | 35.69 |
STAMP VALUE
1/2 – GT $13.15
WAGE DEDUCTION
|
1/2 GT |
DUES | 0.74 |
VACATION | 2.00 |
LEGAL | 0.00 |
PAC | 0.04 |
DOPS | 0.07 |
2.85 |
LOCAL 138 INTERNATIONAL UNION OF OPERATING ENGINEERS
WAGE SCHEDULE: JUNE 1, 2021 to MAY 31, 2022
SCHEDULE B Building Construction
The rates shown in this schedule represent the rates of wages effective June 1, 2021 to be paid for the listed classification from start to finish of the job, for forty (40) hours a week in accordance with Article VIII, IX, X Section 1 of the Collective Bargaining Agreement effective June 1, 2021.
THE FOLLOWING AMOUNTS ARE DEDUCTED FROM WAGES FOR EACH HOUR OF WORK AND ARE INCLUDED IN THE RATE CLASSIFICATIONS:
Note: Table scrolls right to left if needed
Regular Time |
1/2 GT | Overtime | 1/2 OT | |
DUES CHECKOFF | 2.60 | 0.74 | 2.60 | 1.30 |
VACATION | 4.00 | 2.00 | 8.00 | 4.00 |
LEGAL FUND | 0.10 | 0.00 | 0.00 | 0.00 |
POLITICAL ACTION | 0.10 | 0.04 | 0.10 | 0.05 |
DEFENSE ORG | 0.15 | 0.07 | 0.15 | 0.08 |
TOTAL | 6.95 | 2.85 | 10.85 | 5.43 |
- ABI MACHINE – (150,000lbs and over) PLUS OILER
- ABI MACHINE – (149,999 lbs and UNDER when driving steel sheet piles)*
- CHERRYPICKER (GREATER THAN 75 TONS) PLUS OILER
- CHERRYPICKER – 75 TONS*
- CRANE (GREATER THAN 75 TONS) PLUS OILER
- CRANE, TRUCK – PLUS OILER
- DERRICK – PLUS OILER
- DRAGLINE, DREDGELINE – PLUS OILER
- CRANE, CRAWLER – PLUS OILER
- TOWER CRANE (1st TOWER) – PLUS OILER
- TOWER CRANE (2nd TOWER OR MORE) PLUS OILER PLUS MAINTENANCE MAN
- PILE DRIVER – PLUS OILER
Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.
Climb time for Tower Crane is as follows:
- Up to 100 ft. – 15 minutes up and down (30 minutes overtime)
- Over 100 ft. – 30 minutes up and down (1 hour overtime)
AA-Crane Rates
1-Hour | 8-Hour | Weekly |
84.13 | 673.04 | 3,365.20 |
Overtime Rates
1/2-Hour | 1-Hour |
84.13 | 168.26 |
- ABI MACHINE – (149,999 lbs and under when used for Auger and Drilling)*
- ASPHALT SPREADER – PLUS OILER
- BACKHOE CRAWLER (360 SWING) (150,000 LBS. AND OVER) PLUS OILER
- BACKHOE CRAWLER *(360 SWING) (UP TO 150,000 LBS)
- BARRIER MACHINE
- CMI or MAXIM SPREADER
- CONCRETE PUMP*
- DIRECTIONAL BORING *
- GRADALL*
- GRADER *
- HOIST, 3 DRUM OR MULTI-PLATFORM
- LASER SCREED *
- LOADING MACHINE (BUCKET) CAP, OF 10 YDS OR OVER *
- LONG LINETRUCK
- MILLING MACHINE, LARGE- PLUS OILER
- PIPELINE WELDER
- PLANT ENGINEER *
- POWER WINCH, STONE SETTING/STRUCTURAL STEEL
- POWERHOUSE
- SCOOP, CARRY-ALL, SCRAPER IN TANDEM *
- SIDEBOOM TRACTOR *
- SIDEBOOM TRACTOR, USED IN TANK WORK *
- SPECIAL TRACK ALIGNMENT MACHINE *
- STONE SPREADER, SELF PROPELLED *
- STRIPING MACHINE (LONG LINE/TRUCK MOUNTED)
- TANK WORK*
- TIGER CAT (ASPHALT & CONCRETE CUTTING)*
- TREE GRABLE *
- VERMEER ROCK CUTTER*
* Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.
A-Rates
1-Hour | 8-Hour | Weekly |
70.09 | 560.72 | 2,803.60 |
Overtime Rates
1/2-Hour | 1-Hour |
70.09 | 140.16 |
- BACKHOE * OTHER THAN 360 DEGREES
- BELT SCRETE
- BULLDOZER *
- BOOM TRUCK
- BORING MACHINE/AUGER
- CHERRYPICKER (LESS THAN 75 TONS) *
- CONVEYOR, MULTI
- CURB MACHINE, ASPHALT OR CONCRETE
- DINKY LOCOMOTIVE
- DRILL RIG FOR DOWELS
- FIELD MECHANIC
- FORK LIFT *
- HOIST, 2 DRUM
- LOADING MACHINE *
- LOADING MACHINE, FRONT END *
- MECHANICAL COMPACTORS, MACHINE DRAWN *
- MULCH MACHINE, MACHINE-FED
- POST HOLE/AUGER
- POWER WINCH, OTHER THAN/STRUCTURAL STEEL
- PUMP, HYDRAULIC, WITH BORING MACHINE
- ROLLER, ASPHALT *
- SCOOP, CARRYALL, SCRAPER *
- SKID LOADER/SKID STEER *
- TRENCHING MACHINE *
- VERMEER MACHINE *
- WORKBOAT AND INSPECTION BOAT
* Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.
B-Rates
1-HOUR | 8-HOUR | WEEKLY |
66.53 | 532.24 | 2,661.20 |
Overtime Rates
1/2 Hour | 1 Hour |
66.53 | 133.06 |
* Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.
- CONCRETE FINISHING MACHINE*
- CONCRETE SAW
- CONCRETE SPREADER
- DIRT ROLLER *
- HOIST, (1 DRUM)
- INTERIOR HOIST
- OILER TRUCK CRANE (PILE WORK)
- POWER BROOM *
- SMALL MILLING MACHINE *
- VACTOR TRUCK
- VAC-ALL
C-Rates
1-HOUR | 8-HOUR | WEEKLY |
64.17 | 513.36 | 2,566.80 |
Overtime Rates
1/2 Hour | 1 Hour |
64.17 | 128.34 |
- BOILER (THERMOPLASTIC)
- CONCRETE BREAKER *
- CONVEYOR
- CURING MACHINE
- DETAIL TRUCK
- FIREMAN
- FORK LIFT, WALK BEHIND, POWER OPERATED *
- GENERATOR
- GRINDER
- HYDRA HAMMER *
- MAINTENANCE ENGINEER (SMALL EQUIPMENT)
- MAINTENANCE ENGINEER, (WELL POINT)
- MAINTENANCE ENGINEER, (WELDING AND BURNING)
- MECHANICAL, COMPACTORS, HAND OPERATED (FORWARD AND REVERSE) PIN PULLER
- PORTABLE HEATERS
- POWER BUGGIES *
- PULVI MIXER*
- PUMP, DOUBLE ACTION DIAPHRAGM
- PUMP 4 INCH AND OVER
- PUMP, HYDRAULIC
- PUMP, JET
- PUMP, SUBMERSIBLE
- RIDGE CUTTER
- SHOTBLASTER
- STRIPING SUPPORT EQUIPMENT
- TRENCHLESS PIPE REHAB (robotic unit operator, equipment used in the cleaning and television of sewers, closed-circuit television inspection equipment)
D-Rates
1-HOUR | 8-HOUR | WEEKLY |
48.77 | 390.16 | 1,950.80 |
Overtime Rates
1/2 Hour | 1 Hour |
48.77 | 97.54 |
* Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.
- BATCHING PLANT, ON SITE OF JOB
- COMPRESSOR
- COMPRESSOR, STRUCTURAL STEEL COMPRESSOR, 2 OR MORE IN BATTERY
- GENERATOR, SMALL
- GROUND HEATER, BOILERS
- POWER GRINDER
- MIXER, WITH SKIP *
- MULCH MACHINE, HAND FED
- OILER
- PIPELINE WELDER HELPER
- POWER WASHER
- PUMP, UP TO 3 INCHES (second pump)
- PUMP, GYPSUM
- PUMP, SINGLE ACTION 1 TO 3 INCHES (second pump) ROOT CUTTER
- STUMP CHIPPER
- TRACK TAMPER
- TRACTOR, TRACK OR WHEEL *
- TRENCHING MACHINE, HAND
- WELDING MACHINE
- WELDING MACHINE, PILE WORK
- WELDING MACHINE, STRUCTURAL STEEL
- WORK BOAT, DECKHAND
E-Rates
1-HOUR | 8-HOUR | WEEKLY |
46.67 | 373.36 | 1,866.80 |
Overtime Rates
1/2-Hour | 1-Hour |
46.64 | 93.34 |
1-HOUR | 1-HOUR OT | |
LEAD ENGINEER | 78.90 | 157.80 |
EQUIPMENT RATES – OTHER
1.00 Hour Additional | CRANE, BOOM LENGTHS 100 FT. (INCLUDE JIB, LESS THAN 150 FT.) |
1.50 Hour Additional | CRANE, BOOM LENGTHS 150 FT. (INCLUDE JIB, LESS THAN 250 FT.) |
2.00 Hour Additional | CRANE, BOOM LENGTHS 250 FT. (INCLUDE JIB, LESS THAN 350 FT.) |
3.00 Hour Additional | CRANE, BOOM LENGTHS 350 FT. |
HAZARDOUS WASTE PAY DIFFERENTIAL
LEVEL A – $3.50 PER HOUR OVER MACHINE RATE
LEVEL B – $2.50 PER HOUR OVER MACHINE RATE
LEVEL C – $1.50 PER HOUR OVER MACHINE RATE
OFF ROAD TRUCKS
JUNIOR ENGINEER
F-Rates
1-HOUR | 8-HOUR | WEEKLY |
45.40 | 363.20 | 1,816.00 |
Overtime Rates
1/2-Hour | 1-Hour |
45.40 | 90.80 |
VALUE EFFECTIVE JUNE 1, 2021
Note: Table scrolls right to left if needed
STRAIGHT TIME RATES | GT | OVERTIME RATES | ||||
40-HR | 8-HR | 1-HR | 1/2-HR | 1-HR | 1/2-HR | |
Welfare | 634.00 | 128.80 | 15.85 | 0.00 | 0.00 | 0.00 |
HRA | 120.00 | 24.00 | 3.00 | 0.00 | 6.00 | 3.00 |
Unemp. | 54.00 | 10.80 | 1.35 | 0.00 | 0.00 | 0.00 |
Pension | 224.00 | 44.80 | 5.60 | 2.80 | 5.60 | 2.80 |
Annuity | 440.00 | 88.00 | 11.00 | 7.50 | 22.00 | 11.00 |
App. Tr. | 60.00 | 12.00 | 1.50 | 0.00 | 0.00 | 0.00 |
Vac. | 160.00 | 32.00 | 4.00 | 2.00 | 8.00 | 4.00 |
Dues | 104.00 | 20.80 | 2.60 | 0.74 | 2.60 | 1.30 |
Legal | 4.00 | 0.80 | 0.10 | 0.00 | 0.00 | 0.00 |
Pac | 4.00 | 0.80 | 0.10 | 0.04 | 0.10 | 0.05 |
Dops | 6.00 | 1.20 | 0.15 | 0.07 | 0.15 | 0.08 |
Ind Adv | 20.00 | 4.00 | 0.50 | 0.00 | 0.50 | 0.25 |
LMF | 40.00 | 8.00 | 1.00 | 0.00 | 1.00 | 0.50 |
Total | 1,870.00 | 374.00 | 46.75 | 13.15 | 45.95 | 22.98 |